YSDXR Series automatic plastic cup forming, filling and sealing machine offers a competitive forming,filling and sealing solution for liquid,semi-liquid and pasty food products, such as yogurt ,milk,mineral water, beverage , ice cream, seasoning and so on.

The process is from ionization dedust remove,preheating,cup forming and labeling, dynamic fruit mixing and filling, cover sealing, date printing, cutting and product conveying. The cutting mould could be adjusted based on product requirement to form six-pack cups, eight-pack cups, twelve-pack cups.

YSDXR Serial machine will be equipped with the laminar flowing air purify system, CIP connection and volumetric dynamic fruit mixing system, it is full-automatic equipment for high-efficiency, high-quality production in modern enterprise.The machine can be customized according to customers’ requirements so as to meet different customers’ needs.

Applicable Filling material:Liquid:yogurt ,milk,mineral water, beverage , ice cream, seasoning and so on Cap film material:Al+plasticlaminated film;paper+plastic laminated film Forming film material: PS/PP/PET etc.

YSZB Series automatic plastic cup filling and sealing machine is capable of

working under full-automatic conditions. The process is from cup loading,

cup falling ,filling,lid foil feeding and sealing ,date printing and product output

and liquid controlling. The filling and sealing machine can be customized to

meet different customers’ needs. The machine has been widely used in

the food industry, packaging of the yogurt ,milk, mineral water, beverage ,

ice cream, seasoning and so on. Applicable Filling material:Liquid: Yogurt,

milk, sauce and so on. Cap film material:Al+plastic laminated film;

paper+plastic laminated film,0.08mm-0.15mm.

YSZB-

6000

YSZB-

9000

YSZB-

20000

Step

cups

Standard

capacity

6000

cups/h

9000

cups/h

12000

cups/h

Filling

volume

Cup

diameter

φ50mm~

φ80mm

φ50mm~

φ80mm

φ50mm~

φ80mm

φ50mm~

φ80mm

Air

consumption

Outer

dimensions

(appr.)

5×2.5×3.2

m (L×W×H)

5×2.8×3.2

m (L×W×H)

5.5×3.2×3.2

m (L×W×H)

7×3.5×3.5

m(L×W×H)

Power

supply (optional)

YSYGF series machine is capable of working under full-automatic conditions. The machines are applicable to the packaging production of milk. yogurt, milk beverage, fruit juice and so on, the completed full-automatically process is from vacuum negative pressure filling,cap-forming, capping, high-frequency sealing to product outputting.

Applicable Filling material:Liquid: Yogurt, milk, drink, fruit juice and so on.

(Viscosity: 10~30 centipoises)

Applicable packaging material: HDPE/PP/PS/PET bottle; Cap material is

Al+plastic laminated film.

YLP bottle unscrambler is composed of carrying bottle part, bottle arrangement turntable, main bottle arrangement part, electronic control unit and pneumatic device.

A large amount of disorganized bottles is involved in bottle arrangement turntable, which is sent by carrying bottle part, and then conveyed to bottle arrangement part by the belt so as to the bottles can be stood and transferred to the user’s conveyor in an organized way.

Bottle storage part can store a great number of bottles and is able to convey the bottles to bottle arrangement turntable. The speed of conveyor line can be adjusted by potentiometer of electrical box. Motor on and off can be controlled by photo electricity, which is external set on the cover of turntable.

Applicable bottle:The bottle mouth and membrane line should be flat.The deviation of the bottle mouth should be less than±0.25mm.The deviation of the bottle height should be less than ±0.2mm. Applicable bottle material:HDPE/PP/PS etc.

YXG Series automatic rotary capping machine has been designed with high quality and well known for their reputation of reliability and durability.The rotary capping machine integrates bottle inlet, cap sort, cap feed, capping, bottle outlet together. Well suitable for diversified caps, also very friendly applicable for anti-theft caps. Caps are grasped and positioned well, harmless to caps during the machine running. Magnetic cap screwing technology,continuous adjustable magnetic torque of capping head and ensuring fastness of the cap.

Applicable bottle: PET/PP/Glass round or square bottle

Applicable cap: Plastic screw cap/ Pressure cap

2.2×1.6×1.7

(L×W×H)

2.3×1.6×1.7

(L×W×H)

2.6×1.8×1.7

(L×W×H)

2.8×2×1.7

(L×W×H)

YOUNGSUN cap maker is an important part of rotary plastic bottle filling and sealing machine, It is between filling system and sealing system.It includes two systems, cap (lid) making system and aluminum cap conveyor adding cap system and includes following procedures: automatic film feeding device, driving device, automatic film collecting device, split lid device, automatic waste film recycling device etc.

The splitting module cuts the film into three or four caps,and then the caps are slid into the end of the slideway to be awaiting to be taken by the mouth of the bottle.

≤25000bph for three Splitting Module

≤40000bph for four Splitting Module

CGX722 blowing, filling and capping machine integrates the blowing system, filling system and capping system. The transmission, empty bottle handing and storage processes are reduced. It has a wide application in beverage industry and packaging of liquid products as juice, milk drink, water etc.

YSJ Series spray type pasteurization and cooling tunnel performed food sterilization on normal pressure, its temperature is controlled 2～3℃lower than water boiling point, the actual temperature is often decided by food sterilizing technical requirement and location(when air pressure lower than boiling point, temperature is low, so maximum sterilizing temperature is low too.)

It adopts sterilization method, the principle is limited in a certain temperature range85℃-90℃,If the temperature is high enough, the bacteria will die. Different bacteria have different optimum growth temperature, heat resistance, and cold capacity.

Applicable product:high temperature instant sterilization of liquid materials such as milk,soy milk , food, fruit juice and so on.

Machine size

(L x W x H):

14.4×2.28

×1.8m

16.8×2.28

×1.8m

21.6×2.28

×1.8m

YSXZB Series automatic rotary preformed cup filling and sealing machine is applicable to pack the products like yogurt ,milk,mineral water, beverage , ice cream, seasoning and so on.The process is from cup separating, sup falling,quantitive filling, suck cap film,sealing,and product conveying.The choice of the machine model and number of filling heads depends on the factors like required output, size and type of packaging and requirements for additional equipment.

The machine can provide a lot of solutions for the below field:suitable for both traditional and innovative packaging designs, quick change-over to alternative packaging, different ways of container closing.

Applicable Filling material:Liquid:yogurt ,milk,mineral water, beverage , ice cream, seasoning and so on Cap film material:Al+plastic laminated film;paper+plastic laminated film. Pre-cut lid or film roll. Preformed cup type: Paper cup,Plastic cup,Alu.cup etc.

1.3×1.35×2.8

(L x W x H)

.1.5×1.6×2.8

(L x W x H)

.1.8×2×2.8

(L x W x H)

YSXZL Series Pouch Filling and Capping Machine is capable of working under full-automatic conditions. The process is from sachet loading, vacuum, fixed-position filling, nitrogen gas filling (optional), cleaning for spout, cap feeding and inserting, cap-screwing, pouch discharging and liquid controlling.

Applicable Filling material:Liquid or semi-liquid (for example: fresh milk, yogurt beverage, juice, pure water, beverage, sauce, low consistency jam, oil etc)

Applicable packaging material:OPP/AL/PE, PET/VMPET etc.

YOUNGSUN spout inserter has been designed with high quality and well known for their reputation of reliability and durability.

YOUNGSUN has years of experience in manufacturing spout inserter. The high quality of all materialand strict technical standard for all mechanical and electric components, with high efficiency, precise assembling and rigorous testing procedures, lead to high performance ,safe and durable products.

Spout inserter is designed for inserting and sealing spouts on the top center of stand up pouch. It has wide application in food, beverage and daily chemical industry.

YSXCSP serial rotary type ultra clean filling and capping/sealing machine?is designed for big bucket filling and capping/sealing. Usually it is for the low temperature and cold chain product, such as yoghurt and yoghurt beverage.

To serve as the manufacturer of advanced packaging system and engage in providing the best packaging solution for customer.YOUNGSUN secondary packaging system covers the beverage, food, household & personal care products and other industries.The packaging system will be designed based on customers’ different requirements of bottle, can, film pack and box.